The LED film display utilizes LED chips and driver ICs, with a transparent PCB as the substrate, produced using SMT (Surface Mount Technology). The product is lightweight, thin, and has high transparency. Sizes can be customized according to the installation site, and installation is simple, directly adhering to the back of glass.
Pixel Pitch | 8mm |
Pixel | 15625 points/m2 |
LED specification | SMD2121 (light drive in one) |
Pixel composition | 1R1G1B |
Module Size | 1000mm*240mm |
Module Resolution | 125*30 |
Pixel resolution | 125*125/㎡ |
Permeability | ≥85% |
Box wiring mode | Internal wiring (clean back) |
Weight | ≤ 3KG/m2 |
White balance brightness | ≥3000cd/㎡ |
Peak power consumption | 800 W/㎡ |
Average power consumption | About 260 W/㎡ (depending on the video source) |
Refresh frequency | ≥3840hz |
Grayscale level | 16Bit |
Brightness control level | Grade 0-255 |
Color temperature | 3200K-8500K (adjustable) |
Frame change frequency | ≥60Hz |
Viewing angle | H-H140 degrees V-V140 degrees |
Input signal | DVI VGA, composite video |
Control screen mode | Or synchronous box (computer control screen) or asynchronous box (WiFi connection mobile phone APP control screen, USB flash drive control screen) |
Protection grade | IP30 |
Power supply requirements | AC 220V ± 10%, 50-60Hz, (optional wide voltage 110V and 9-36V) |
working temperature | -20~50 ℃ |
Theoretical service life | 100000 hours |
1. Ultra-Thin: Thickness is only 3mm, with a weight of just 3.5kg/㎡.
2. Flexible: The LED film display offers strong flexibility, allowing it to conform to curved glass structures.
3. Product Structure of the LED Film Display: The aluminum housing contains the power supply and receiving card, along with a transparent PCB and LED chips. Each panel is connected via power and signal interfaces. The circuit board features a grid design for high transparency.